SequentialRangingReal#
- class SequentialRangingReal(name: str, instrument: Instrument, sigma: ArrayWUnits = None, meas_bias=None, state_definition=None, sequence_definition=None, epoch_sec=None, computed_measurements_dict=None, partials_method: str = None, eps_dict: dict = None, media_corrections: MediaCorrections | None = None, light_time_frame: str = 'barycentric', rlt_bodies: tuple = None, solar_corona: bool = True, electronic_delays: bool = True, light_time_settings: dict = None)#
Bases:
MeasurementModels the real sequential ranging measurement model.
Generates computed sequential ranging observables between a DSN ground station and a spacecraft using the precise round-trip light-time (RTLT) formulation, including relativistic corrections and optional media corrections. Observables are expressed in Range Units (RU).
Count observable
The sequential ranging observable integrates the piecewise-linear uplink ramp frequency \(f_T(t)\) over the round-trip window \([t_1,\,t_3]\), converts to Range Units, and reduces modulo the ranging-code period \(M\):
\[\rho_{RU} = \Bigl(\mathrm{RU}\cdot \int_{t_1}^{t_3} f_T(t)\,dt\Bigr)\bmod M + b_{RU}\]where \(\mathrm{RU}\) is the Range Unit conversion factor, \(M\) is the modulo length of the ranging code in RU, and \(b_{RU}\) is an optional station range bias.
Media corrections
When a
MediaCorrectionsobject is attached, the total one-way excess path delay (Moyer eq. 10-27) is\[\Delta\tau_{total} = \frac{1}{c}\bigl( p_{tropo,t_3} + p_{tropo,t_1} + p_{iono,t_3} + p_{iono,t_1} \bigr)\]and the media-corrected observable becomes (Moyer eq. 13-127):
\[\rho_{RU}^{corr} = \rho_{RU} + \mathrm{RU}\cdot f_{T,1}\cdot\Delta\tau_{total}\]Note that the ionospheric contribution enters with a positive sign (opposite to Doppler).
- Parameters:
- namestr
Name of the measurement model.
- instrumentInstrument
Ground station or antenna instrument (e.g. GroundStation).
- sigmaArrayWUnits, optional
Measurement standard deviation. Defaults to
None.- meas_biasfloat or ArrayWUnits, optional
Range bias of the ground station [RU], used when the state vector holds no
range_bias_RUof this station. One value applies to every pass; more hold one per pass, grouped byset_pass_epochs(). The same holds for arange_bias_RUstate component. Defaults toNone.- state_definitionlist, optional
StateVector definition list. Defaults to
None.- sequence_definitionMissionSequence, optional
Mission sequence whose per-leg state definitions replace state_definition. Defaults to
None.- epoch_secEpochArray, optional
Epoch expressed in seconds of day. Defaults to
None.- computed_measurements_dictdict, optional
Auxiliary tracking-data dictionary required by
computed_measurements()(only optional when the model is used for observed measurements alone). Holds the TRK-2-34 [1] auxiliary quantities of each tracking pass, typically extracted from the DSN TRK-2-34 archive SFDU records — see the OSIRIS-REx real-measurement tutorial (advanced_RealMSR_OSIRIS_REx_OD) for a worked example of building it. Unless noted otherwise, each key maps to a list/array with one entry per observation epoch:'RU': seconds-to-Range-Unit conversion factor (pre-frequency-multiplication), derived from the SFDU 7 exciter scalars as16 * exc_scalar_num / exc_scalar_den.'M': sequential-ranging modulo [RU] (SFDU 7); computed range observables are reported modulo this value.'M2_num','M2_den': numerator and denominator of the spacecraft transponder turn-around ratioM2(SFDU 16).'ul_freq': uplink frequency at the time tag [Hz] (SFDU 7, TRK-2-34 3-70).'rcv_time_tag_delay','transmit_time_tag_delay': receiver and transmitter time-tag delays [s] (TRK-2-34 3-10/3-11);-1marks an invalid entry and is treated as 0.'ul_zheight_corr','dl_zheight_corr': uplink and downlink z-height corrections [s] (SFDUs 2 and 3);-99.0marks an invalid entry and is treated as 0.'ul_stn_cal','dl_stn_cal': uplink and downlink ground-station calibrations [RU] (SFDU 7, TRK-2-34 3-68).'scft_transpd_delay': spacecraft transponder delay [RU], scalar (mission constant).'scft_transpd_delay_s': the same transponder delay expressed in seconds, scalar.'array_delay': arraying-equipment path delay [s], optional;-1/-99mark invalid entries and are treated as 0.'exc_scalar_num','exc_scalar_den': exciter scalars (SFDU 7), optional; written with generated measurements so that'RU'can be read back.'rng_type','version_num': ranging type and format version (SFDU 7), optional; carried into generated measurements.'ramp_sec','ramp_day','ramp_freq','ramp_rate','ramp_type': transmitter frequency ramp table (SFDU 9) — seconds of day, day of year, ramp reference frequency [Hz], ramp rate [Hz/s], and ramp type of each ramp record (one entry per ramp record, not per observation).'ramp_year': year of each ramp record (SFDU 9year), optional; needed when the ramp table or a round trip crosses a new year.
Defaults to
None.- partials_method{“analytical”, “fd”}, optional
Which H-tilde implementation to use.
"analytical"(the default) uses the Moyer partials, which differentiate the same light-time solution the forward model produced and reuse its cached endpoints, for roughly 380x less cost than"fd"on this model."fd"finite-differences the real forward model – one full forward run per state component, slow, but it differentiates exactly the observable being fitted. Defaults toNone, i.e."analytical".- eps_dictdict, optional
Perturbation magnitudes for finite-difference partials. Spacecraft entries are keyed
dxtodvz; station, Earth-orientation, zenith-delay and electronic-delay entries are keyed by StateDefinition parameter kind, e.g.gs_delta_location_CYL,eop_delta_ut1ortransponder_delay_bias, and are read only bypartials_method="fd"– the analytical partials differentiate those parameters in closed form. Omitted keys fall back to the in-code defaults; seestation_eps_defaults. Defaults toNone.- media_correctionsMediaCorrections, optional
Media-correction object (troposphere / ionosphere). Defaults to
None.- light_time_frame{“barycentric”, “geocentric”}, optional
Space-time frame of the round-trip light-time solution.
"barycentric"(Moyer 2000, Sec. 8.3.6) is valid for any spacecraft."geocentric"(Moyer 2000, Sec. 8.3.1) keeps only the Earth’s relativistic delay and is meant for spacecraft near the Earth; see_compute_geocentric_RTLT()for what it neglects. Defaults to"barycentric".- rlt_bodiestuple, optional
(spice_id, GM)pairs of the bodies other than the Sun in the relativistic light-time term. Defaults toNone, i.e.Constants.RLT_BODIES; an empty tuple leaves only the Sun. The default takes Mars, Jupiter and Saturn at their barycentres, which is not accurate enough for a Jupiter or Saturn orbiter: pass the planet centres instead (seeConstants.RLT_BODIES).- solar_coronabool, optional
Apply the solar-corona delay to the light time. Defaults to
True.- electronic_delaysbool, optional
Apply the time-tag, z-height, spacecraft transponder and arraying delays of
computed_measurements_dict. Defaults toTrue.- light_time_settingsdict, optional
Convergence settings of the light-time solution, any of the keys of
Measurement.LIGHT_TIME_SETTINGS:"tolerance"[s],"max_iterations"per leg and"et_tai_iterations". Missing keys take the default. Raise the tolerance for a spacecraft beyond about 8 AU, where 1e-12 s is below the float spacing of the light time and a leg runs tomax_iterations. Defaults toNone, i.e. all defaults.
- Attributes:
component_labelsNames of the two components of a vector observable.
computed_measurements_dictAuxiliary TRK-2-34 tracking-data dictionary needed for the generation of the computed measurements of a real radiometric model.
default_dataset_nameDataset name used when the caller does not supply one.
dl_station_calDownlink station calibration [RU] written into simulated auxiliary data.
dsn_bandsDSN frequency-band parameters of this model, a read-only mapping from band letter to
DSNBand.epoch_secObservation epochs expressed as seconds of day.
instrumentThe instrument.
media_correctionsTropospheric and ionospheric path-delay model, or
Noneif not set.nameThe name of the model.
ramp_entriesNumber of entries of a simulated ramp table, at least 2.
ramp_marginSpan [s] a simulated ramp table extends before the first and after the last observation.
ramp_rateUplink frequency ramp rate [Hz/s] of the ramp table the
default_*_auxbuilders simulate.ramp_typeSFDU 9
ramp_typecode of the segments of a simulated ramp table.range_moduloCode modulo [RU] of the sequential ranging
default_seqranging_aux()simulates, a positive whole number.ranging_typeSFDU 7
rng_typecode of the simulated sequential ranging.ranging_versionSFDU 7
version_numof the simulated sequential ranging.rcv_time_tag_delayReceive time-tag delay [s] written into simulated auxiliary data.
sigmaThe standard deviation of the measurement model.
solar_corona_coefficientCoefficient of the solar-corona group delay [us GHz^2 m^2] of a real model built with
solar_corona=True.transponder_delaySpacecraft transponder delay [RU] written into simulated auxiliary data by the
default_*_auxbuilders.ul_station_calUplink station calibration [RU] written into simulated auxiliary data.
Methods
align_aux_to_epochs(source, key, target[, ...])Sample a TRK-2-34 record at the epochs of another record by time tag.
compute_partials(target, epoch_array, frame)Stacks together measurement _partials for an epoch array at different epochs.
computed_measurements(target, epoch_array, ...)Generate the computed two-way DSN sequential ranging measurement.
default_seqranging_aux(tstart, tend[, N, ...])Default
computed_measurements_dictfor synthetic sequential ranging.generate_measurement_dataset(dataset_name, ...)Generates a MeasurementDataSet object that can be used by filters downstream.
observed_measurements(file_name, meas_name, ...)Reads measurements from a .json file.
residuals(observed_meas, computed_meas)Generates the sequential ranging residuals, wrapped to the range ambiguity.
resolve_elevation_mask(elevation_mask)Normalise an elevation mask to degrees.
rtlt_grad_pos_exact(n_hat_dn, n_hat_up, ...)Exact round-trip light-time gradient with respect to the spacecraft position.
rtlt_grad_station_exact(n_hat_dn, n_hat_up, ...)Exact round-trip light-time gradients with respect to the station position.
rtlt_leg_weights(n_hat_dn, n_hat_up, v_sc, ...)Sensitivity of the round-trip light time to a delay inside each leg's solution.
set_pass_epochs(pass_epochs)Enable per-pass biases.
set_trajectory(trajectory)Attach the reference trajectory supplying the STMs.
transponder_delay_seconds(delay_RU, ...)Convert a spacecraft transponder delay from range units to seconds.
update_reference_state(state_vector)Attach the estimated state the model should read its parameters from.
validate_aux(aux[, label])Check that an auxiliary-data dictionary is internally consistent.
write_observed_measurements(target, ...)Generates synthetic measurements and write them as a .json file.
See also
scarabaeus.MeasurementAbstract base class for all measurement models.
scarabaeus.DopplerRealCompanion real Doppler model.
scarabaeus.MediaCorrectionsTropospheric and ionospheric path-delay model.
References
[1]“TRK-2-34, DSN Tracking System Data Archival Format”, DSN No. 820-013, TRK-2-34, Rev. N.
- static align_aux_to_epochs(source: dict, key: str, target: dict, invalid=None) ndarray#
Sample a TRK-2-34 record at the epochs of another record by time tag.
Each SFDU record of a tracking file has its own cadence (e.g. the uplink z-height correction every second, the ranging aux at the ranging cadence), so its rows do not correspond to the measurement rows. The value in force at each target epoch is the latest source entry at or before it (zero-order hold); target epochs earlier than the whole source take its first entry.
- Parameters:
- sourcedict
Record holding
year,doy,secandkey.- keystr
Field of
sourceto sample.- targetdict
Record holding the
year,doy,sectime tags to sample at, typically the measurement record (e.g.trk["2W_doppler"]).- invalidfloat, optional
Source entries equal to this value are skipped (e.g.
0for the uplink frequency of rows with no uplink).
- Returns:
- np.ndarray
source[key]at each target epoch, of lengthlen(target["sec"]).
- Raises:
- Measurement.AuxDataError
If
sourceholds no valid entry ofkey.
- static resolve_elevation_mask(elevation_mask: ArrayWUnits | float) float#
Normalise an elevation mask to degrees.
- Parameters:
- elevation_maskArrayWUnits or float
Minimum elevation angle. An
ArrayWUnitsis converted from its own units, so radians work as well as degrees. A bare number is taken to be in degrees, which is what the parameter has always meant and what every default (10.0) is.
- Returns:
- float
The mask in degrees.
- Raises:
- ElevationMaskError
If the mask is not a number or an angle, or is outside 0 to 90 degrees. Also if it is a bare number that is not a whole number of degrees and is no more than pi/2: 0.17 could be 0.17 deg or 10 deg meant in radians, and reading it the wrong way silently keeps or drops the observations near the horizon. Such a mask has to carry its units. A larger bare number is read as degrees, since as radians it would be above 90 deg and be refused anyway.
Examples
Measurement.resolve_elevation_mask(10.0) # 10.0 Measurement.resolve_elevation_mask(ArrayWUnits(0.2, rad)) # 11.459... Measurement.resolve_elevation_mask(ArrayWUnits(0.5, deg)) # 0.5 Measurement.resolve_elevation_mask(0.5) # ElevationMaskError
- static rtlt_grad_pos_exact(n_hat_dn: ndarray, n_hat_up: ndarray, v_sc: ndarray, v_gs: ndarray, c: float) ndarray#
Exact round-trip light-time gradient with respect to the spacecraft position.
Chains Moyer (2000) Eqs. 12-12 (downleg) and 12-17 (upleg) through the reflection time \(t_2\), holding the reception time \(t_3\) fixed, so that \(\rho = t_3 - t_1\) and \(\partial \rho / \partial \mathbf{r}_{SC} = -\partial t_1 / \partial \mathbf{r}_{SC}\) [s/km]. With the Eq. 8-59/8-60 definitions, the spacecraft transmits on the downleg and the station on the upleg:
\[ \begin{align}\begin{aligned}\dot{p}_{23} = \hat{\mathbf{r}}_{23} \cdot \mathbf{v}_{SC} / c = -\hat{\mathbf{n}}_{dn} \cdot \mathbf{v}_{SC} / c, \qquad \dot{p}_{12} = \hat{\mathbf{r}}_{12} \cdot \mathbf{v}_{GS} / c = \hat{\mathbf{n}}_{up} \cdot \mathbf{v}_{GS} / c\\\dot{r}_{12} = \hat{\mathbf{n}}_{up} \cdot (\mathbf{v}_{SC} - \mathbf{v}_{GS}) / c, \qquad \dot{r}_{12} + \dot{p}_{12} = \hat{\mathbf{n}}_{up} \cdot \mathbf{v}_{SC} / c\end{aligned}\end{align} \]where the station terms cancel in the last sum. The gradient is then
\[\frac{\partial t_2}{\partial \mathbf{r}_{SC}} = -\frac{\hat{\mathbf{n}}_{dn}}{c\,(1 - \dot{p}_{23})}, \qquad \frac{\partial \rho}{\partial \mathbf{r}_{SC}} = -\frac{(1 - \dot{r}_{12} - \dot{p}_{12})\, \partial t_2 / \partial \mathbf{r}_{SC} - \hat{\mathbf{n}}_{up} / c} {1 - \dot{p}_{12}}\]- Parameters:
- n_hat_dnnumpy.ndarray, shape (3,)
Unit vector GS to SC on the downleg, \(\hat{\mathbf{n}}_{dn} = (\mathbf{r}_{SC}(t_2) - \mathbf{r}_{GS}(t_3)) / \rho_{dn}\).
- n_hat_upnumpy.ndarray, shape (3,)
Unit vector GS to SC on the upleg, \(\hat{\mathbf{n}}_{up} = (\mathbf{r}_{SC}(t_2) - \mathbf{r}_{GS}(t_1)) / \rho_{up}\).
- v_scnumpy.ndarray, shape (3,)
Spacecraft velocity at \(t_2\) [km/s], in the space-time frame the light time is solved in (see
_light_time_velocity()).- v_gsnumpy.ndarray, shape (3,)
Ground station velocity at \(t_1\) [km/s], in the same frame.
- cfloat
Speed of light [km/s].
- Returns:
- numpy.ndarray, shape (3,)
\(\partial \rho / \partial \mathbf{r}_{SC}\) [s/km].
References
[1]Moyer, T. D. (2000). Formulation for Observed and Computed Values of Deep Space Network Data Types for Navigation. JPL Publication 00-7.
- static rtlt_grad_station_exact(n_hat_dn: ndarray, n_hat_up: ndarray, v_sc: ndarray, v_gs: ndarray, c: float) tuple#
Exact round-trip light-time gradients with respect to the station position.
The station enters at reception \(t_3\) and at transmission \(t_1\), through the same Moyer (2000) 12-12/12-17 chain as
rtlt_grad_pos_exact(). Displacing the receiver at \(t_3\) moves the reflection time \(t_2\) (Eq. 12-12, with the station as the receiver), and the upleg carries that change to \(t_1\) through its own \(\dot{p}_{12}\) denominator (Eq. 12-17); displacing the transmitter at \(t_1\) enters the upleg only:\[\frac{\partial \rho}{\partial \mathbf{r}_{GS}(t_3)} = -\frac{(1 - \dot{r}_{12} - \dot{p}_{12})\,\hat{\mathbf{n}}_{dn}} {c\,(1 - \dot{p}_{23})(1 - \dot{p}_{12})}, \qquad \frac{\partial \rho}{\partial \mathbf{r}_{GS}(t_1)} = -\frac{\hat{\mathbf{n}}_{up}}{c\,(1 - \dot{p}_{12})}\]with \(\dot{p}\) and \(\dot{r}\) as defined in
rtlt_grad_pos_exact(): each leg’s range over c weighted byrtlt_leg_weights(). Their sum is-rtlt_grad_pos_exact(...): a common translation of station and spacecraft leaves the light time unchanged. Dropping the denominators, i.e. using \(-\hat{\mathbf{n}}/c\) on each leg, is off by the transmitters’ velocities over c, about 1e-4 relative with heliocentric velocities.- Parameters:
- n_hat_dnnumpy.ndarray, shape (3,)
Unit vector GS to SC on the downleg.
- n_hat_upnumpy.ndarray, shape (3,)
Unit vector GS to SC on the upleg.
- v_scnumpy.ndarray, shape (3,)
Spacecraft velocity at \(t_2\) [km/s].
- v_gsnumpy.ndarray, shape (3,)
Ground station velocity at \(t_1\) [km/s].
- cfloat
Speed of light [km/s].
- Returns:
- grad_t3numpy.ndarray, shape (3,)
\(\partial \rho / \partial \mathbf{r}_{GS}(t_3)\) [s/km], in the frame of the input vectors.
- grad_t1numpy.ndarray, shape (3,)
\(\partial \rho / \partial \mathbf{r}_{GS}(t_1)\) [s/km], in the same frame.
See also
rtlt_grad_pos_exactdefinitions of the inputs.
- static rtlt_leg_weights(n_hat_dn: ndarray, n_hat_up: ndarray, v_sc: ndarray, v_gs: ndarray, c: float) tuple#
Sensitivity of the round-trip light time to a delay inside each leg’s solution.
Uses the Moyer (2000) 12-12/12-17 chain of
rtlt_grad_pos_exact(). A delay \(\delta\tau_{23}\) in the downleg equation moves the reflection time \(t_2\), and the upleg carries that change to \(t_1\); a delay \(\delta\tau_{12}\) in the upleg equation moves \(t_1\) only:\[\frac{\partial \rho}{\partial \tau_{23}} = \frac{1 - \dot{r}_{12} - \dot{p}_{12}}{(1 - \dot{p}_{23})(1 - \dot{p}_{12})}, \qquad \frac{\partial \rho}{\partial \tau_{12}} = \frac{1}{1 - \dot{p}_{12}}\]with \(\dot{p}\) and \(\dot{r}\) as defined in
rtlt_grad_pos_exact(). Both are 1 to within the transmitters’ velocities over c, about 1e-4 with heliocentric velocities. They apply to what the iteration solves for, the geometric range and the Shapiro delay, and not to the media, corona and electronic delays, which are added after it converges.- Parameters:
- n_hat_dnnumpy.ndarray, shape (3,)
Unit vector GS to SC on the downleg.
- n_hat_upnumpy.ndarray, shape (3,)
Unit vector GS to SC on the upleg.
- v_scnumpy.ndarray, shape (3,)
Spacecraft velocity at \(t_2\) [km/s].
- v_gsnumpy.ndarray, shape (3,)
Ground station velocity at \(t_1\) [km/s].
- cfloat
Speed of light [km/s].
- Returns:
- w_dnfloat
\(\partial \rho / \partial \tau_{23}\), dimensionless.
- w_upfloat
\(\partial \rho / \partial \tau_{12}\), dimensionless.
See also
rtlt_grad_pos_exactdefinitions of the inputs.
- static transponder_delay_seconds(delay_RU: float, reference_frequency: float, range_unit: float) float#
Convert a spacecraft transponder delay from range units to seconds.
The delay is divided by
range_unit * reference_frequency, the rate of the clock the delay is counted against.- Parameters:
- delay_RUfloat
Transponder delay as the mission specifies it [RU].
- reference_frequencyfloat
The band’s range-unit reference frequency [1/s], i.e.
Measurement.DSNBand.ru_reference_frequency.- range_unitfloat
The range unit, from the pass’s exciter scalars.
- Returns:
- float
The delay [s].
Notes
Pass the band’s reference frequency, not its uplink frequency. The two differ by 18% in X band, and the delay enters the round-trip light time directly rather than acting as a scale factor, so substituting the uplink makes the delay 2.4 us longer – 1.4 km of two-way range. Tried on real tracking data, that drove the sequential-ranging residuals from 55-206 RU to 2330-2694 RU, so the reference frequency is what the data supports. Why a downlink-scale reference is the right one is an open question; see the attribute’s own note.
- static validate_aux(aux: dict, label: str = '') None#
Check that an auxiliary-data dictionary is internally consistent.
An aux dict describes two things sampled on two different grids: one value per observation, and one entry per ramp-table segment. Everything in each group has to be the same length, and a value meant to be per-observation has to be a sequence rather than a bare number.
Nothing checks that on the way in otherwise, and the failures it prevents surface far from their cause:
Mismatched lengths reach
RampTableManager.integrate(), which indexesramp_freqwith an index derived fromramp_secand raisedIndexError: index 9 is out of bounds for axis 0 with size 5from inside the forward model.A ragged per-observation group reaches
write_observed_measurements(), whose own check then refuses to write the file – correct, but one step later than here.
- Parameters:
- auxdict
The dictionary to check, as a
default_*_auxhelper or_read_aux()produces it.- labelstr, optional
Named in the error, to say which dictionary was wrong.
- Raises:
- TypeError
If aux is not a dict.
Noneis reported specifically, since that means the model was never given its auxiliary data.- ValueError
If the per-observation group or the ramp group is ragged. The message groups the keys by the length they have, since the odd one out is usually obvious once they are laid side by side.
Examples
aux = doppler_model.default_doppler_aux(t0, tf, N=20, band="S") scb.Measurement.validate_aux(aux, label="DSS-25 Range Rate")
- compute_partials(target: Spacecraft, epoch_array: EpochArray, frame: Frame = J2000 (0 - SOLAR SYSTEM BARYCENTER)) list#
Stacks together measurement _partials for an epoch array at different epochs.
- Parameters:
- targetSpacecraft
The target spacecraft.
- epoch_arrayEpochArray
The epochs.
- frameFrame, optional
The reference frame. Defaults to a J2000 Frame object.
- Returns:
- _partialslist
A list with all the _partials evaluated at different epochs in the
epoch_array.
- computed_measurements(target: Spacecraft, epoch_array: EpochArray = None, epoch_start: EpochArray = None, epoch_end: EpochArray = None, tstep: float = 1, frame: Frame = J2000 (0 - SOLAR SYSTEM BARYCENTER), noisy: bool = False, eps_override: dict = None) ArrayWFrame#
Generate the computed two-way DSN sequential ranging measurement.
- Parameters:
- targetSpacecraft
target spacecraft for the two-way measurement model
- epoch_arrayEpochArray
An array of epochs (times) at which the measurements should be computed. If provided, it overrides epoch_start, epoch_end, and tstep.
- epoch_startEpoch
The starting epoch for the range measurement computations. Required if epoch_array is not provided.
- epoch_endEpoch
The ending epoch for the range measurement computations. Required if epoch_array is not provided.
- tstepfloat
The time step, in seconds, between consecutive range measurements. If epoch_array is not provided. Defaults to 1 second.
- frameFrame
The reference frame in which the measurement is generated.
- noisy: bool
Whether to add AWGN at the model’s sigma to the computed sequential ranging measurement. For simulating observations; leave False when computing predicted measurements for a filter. Defaults to False.
- eps_override: dict
Dictionary of delta’s to compute the numeric _partials
- Returns:
- computed_measArrayWFrame
An ArrayWFrame object with the computed measurement values expressed in RU (adimensional)
- Raises:
- Measurement.AuxDataError
If
computed_measurements_dictis missing, lacks a key, or holds a per-epoch entry whose length differs from the epochs.- Measurement.MissingSigmaError
If
noisyis True and the model has nosigma.- Measurement.StationKernelRequiredError
If the station is defined by body-fixed coordinates instead of an ephemeris.
- RuntimeError
If a light-time solution fails (e.g. does not converge); it names the epoch and the target, and chains the original error.
- RampTableManager.RampTableYearError
If the ramp table or a round trip crosses a new year and
computed_measurements_dicthas no'ramp_year'.- MediaCorrections.IncompleteTroposphereError
If
media_correctionshas only one of the two troposphere files.- Measurement.MissingPassIndexError
If the bias holds one value per pass (more than one element) and no epoch-to-pass mapping is set.
Notes
This model has been developed following the details in Moyer 2000. [1]: “TRK-2-34, DSN Tracking System Data Archival Format”, DSN No. 820-013, TRK-2-34, Rev. N
noisy=Falsegives the predicted observable, against which real observations are differenced.noisy=Trueadds white Gaussian noise of standard deviationsigmato it, which simulates observations.A round trip that starts before the first ramp record has no defined transmit frequency. Its computed value is NaN, with a warning, and
Measurement.generate_measurement_dataset()flags it as an outlier.Estimated electronic delays lengthen the round-trip light time on top of the tracking data’s own:
uplink_delay_bias_[tag]of this station at t1,transponder_delay_biasof target at t2 anddownlink_delay_bias_[tag]of this station at t3. Each holds one value for every pass and applies even withelectronic_delays=False.
- default_seqranging_aux(tstart: EpochArray, tend: EpochArray, N: int = 1, ramp_margin: float = None, n_ramp: int = None, band: str = 'X') dict#
Default
computed_measurements_dictfor synthetic sequential ranging.The simulated values are this model’s radiometric defaults:
dsn_bands,range_modulo,ranging_type,ranging_version,ramp_rate,ramp_type,transponder_delay,rcv_time_tag_delay,ul_station_calanddl_station_cal. Set them on the model before calling to change the simulated data.- Parameters:
- tstart, tendEpochArray
Span the simulated observations cover.
- Nint, optional
Number of observations. Every per-observation entry is this long, including year/doy/sec. Defaults to
1.- ramp_marginfloat, optional
Seconds the ramp grid extends beyond the span at each end. Defaults to
ramp_margin. The ramp grid runs wider than the observation span because the ramp is queried at the uplink transmit time, one round-trip light time before the first time tag.- n_rampint, optional
Number of ramp-table entries. Defaults to
ramp_entries.- bandstr, optional
A key of
dsn_bands,"X"or"S"by default (case-insensitive), resolved byMeasurement._resolve_dsn_band(). It sets the uplink frequency, turnaround ratio, exciter scalar and range unit. Defaults to"X".
- Returns:
- SeqRanging_aux_datadict
Aux values needed for computing measurements. Every per-observation array is
Nlong and every ramp array isn_ramplong; seeMeasurement._default_aux_grids().
- generate_measurement_dataset(dataset_name: str | None = None, target: Body = None, observed_meas: tuple | list | None = None, epochs: EpochArray | None = None, frame: Frame = J2000 (0 - SOLAR SYSTEM BARYCENTER), noisy: bool = False) list[MeasurementDataSet]#
Generates a MeasurementDataSet object that can be used by filters downstream.
- Parameters:
- dataset_namestr, optional
The name of the MeasurementDataSet, which becomes the residual key in
solution.json. Defaults todefault_dataset_name—"<instrument>_<measurement_type>".- targetSpacecraft
The target spacecraft.
- observed_meastuple or list, optional
Observed measurements as
(epoch_array, meas_sec, meas_obs, outlier_flag). The computed values are evaluated atepoch_array. Give this orepochs, not both. Defaults toNone.- epochsEpochArray, optional
Epochs to simulate the measurements at, with no outliers flagged. Give this or
observed_meas, not both. Defaults toNone.- frameFrame, optional
The reference frame. Defaults to a J2000 Frame object.
- noisybool, optional
Indicates if noise is added to the measurements or not. Defaults to
False.
- Returns:
- mds_listlist[MeasurementDataSet]
A list of MeasurementDataSet objects representing the measurements with their key properties to be used by a filter.
- Raises:
- ValueError
If neither or both of
observed_measandepochsare given, ifobserved_meascarries fewer than four entries (the fourth is the outlier-flag array, without which the observations cannot be kept on one index set with their flags), or if the model has more than two components.
Notes
This is the single bridge from a measurement model to the estimator:
fit()andcompute()both come through here, andMeasurementDataSetis populated nowhere else. It pairs each observation with its computed value, residual, partial and sigma on one consistent set of indices, which is what lets several models with different epochs and different observables be combined into one filter update.That is also why it, rather than the caller, unpacks
t1, t2, t3fromcomputed_measurements(). The estimator needs the epochs alongside the observable –t2to match measurements across models,t1to detrend residuals during outlier rejection – so they have to survive the trip into the dataset. Seecomputed_measurements()for what each epoch means and why a single-epoch observable collapses all three.The MeasurementDataSet output is generated in 6 steps:
Computed measurements
Partials
Residuals
Sigmas
Outlier flag
Pack everything in a list
Pack the list in a MeasurementDataSet object
- observed_measurements(file_name, meas_name: str = 'meas_sim', units: Units = unitless, frame: Frame = J2000 (0 - SOLAR SYSTEM BARYCENTER), **read_kwargs) ObsData#
Reads measurements from a .json file.
- Parameters:
- file_namestr
The filename of the .json file containig the measurement information.
- meas_namestr, optional
The name of the measurement data to access from the dictionary. Defaults to
'meas_sim'. Files written before the rename use'meas_ideal'; either name resolves to whichever block the file actually contains, with a DeprecationWarning on the fallback.- unitsUnits, optional
Units to be used to write the output AWU. Defaults to
unitless.- frameFrame, optional
Frame to be used to write the output AWF. Defaults to a J2000 Frame object.
- **read_kwargs
Options for the model’s own
_read_aux(), forwarded unchanged. Models with no auxiliary data to read ignore them.This is where
sc_transponder_delay_RUgoes for the DSN radiometric models, which is the only such option today. It is not a named parameter here because this signature is shared by every measurement model, optical ones included.
- Returns:
- ObsData
A
ObsDatanamed tuple with five fields, addressable by name or index:[0]meas_time_etEpochArrayObservation epochs. Built from the file’s UTC station tag via
YDS2et(); see the comment at the conversion below for why this carries SPICE’s time model deliberately.
[1]meas_secnumpy.ndarrayThe observation times as seconds of day, as given in the file.
[2]meas_obsArrayWFrameThe observed quantities, with units and frame attached.
[3]meas_outliersnumpy.ndarrayPer-observation outlier flags, 1 = reject. Seeded from the file’s own
outlier_flagand additionally set here for records carrying the-1no-data sentinel and for the rows the model knows to be invalid (_flag_invalid_rows()). Downstream this is the authoritative flag array: it is what the filter,outlier_flags()and the editors gate on, andgenerate_measurement_dataset()writes into it when the forward model cannot compute an observation.
[4]aux_dictdictAncillary per-observation data read by the model’s
_read_aux(ramp tables, transponder ratios, electronic delays, …). None for models that need none.
Notes
The writing of the json assumes or requires units and frames.
Every row in the file is returned, including rows flagged bad. Nothing is dropped here, so the observations, the
aux_dictand any later outlier rejection all stay on one consistent set of indices.
- residuals(observed_meas: ArrayWFrame, computed_meas: ArrayWFrame) ArrayWFrame#
Generates the sequential ranging residuals, wrapped to the range ambiguity.
- Parameters:
- observed_measArrayWFrame
The observed measurements values (O) [RU].
- computed_measArrayWFrame
The computed measurements values (C) [RU].
- Returns:
- residualsArrayWFrame
AWF with the residual O-C wrapped into \([-M/2, M/2)\).
Notes
Both O and C are reported modulo \(M\), and C carries the bias and media terms added after the modulo, so a plain O-C lands anywhere in \((-M, M)\): a point whose O and C sit on opposite sides of a wrap jumps by a whole modulus, which is frequent with a small \(M\). The residual is the difference closest to zero, see
_wrap_to_modulo().
- set_pass_epochs(pass_epochs: list[list] | None)#
Enable per-pass biases.
- Parameters:
- pass_epochslist[list[float]] | None
Observation epochs grouped by pass, e.g.
[[t0, t1], [t10, t11]]. PassNoneto revert to global-bias mode.
- set_trajectory(trajectory)#
Attach the reference trajectory supplying the STMs.
Read only by the analytical light-time partials, which map a deviation between the endpoints of an observable (see
_short_arc_stm()).- Parameters:
- trajectoryTrajectory
Trajectory carrying the STMs. Must span every epoch the model evaluates.
- update_reference_state(state_vector: StateArray)#
Attach the estimated state the model should read its parameters from.
Call this once per iteration, before
generate_measurement_dataset(). The model then pulls the entries belonging to this instrument, matched on its SPICE ID:meas_bias_ideal_*, as anArrayWUnits.gs_delta_location_ECEF_*, as anArrayWFrame.
- Parameters:
- state_vectorStateArray
The current estimated state. Its layout is also recorded, so that the partials can build a column for every estimated parameter beyond position and velocity.
- write_observed_measurements(target: Spacecraft, epoch_array: EpochArray = None, epoch_start: EpochArray = None, epoch_end: EpochArray = None, tstep: float = 1, frame: Frame = J2000 (0 - SOLAR SYSTEM BARYCENTER), noisy: bool = False, file_name: str = 'ideal_measurement', check_visibility: bool = False, elevation_mask: ArrayWUnits | float = 10.0, folder_path_override: str = None, fmt: str = 'json') None#
Generates synthetic measurements and write them as a .json file. The input of this method encapsulate the ones needed for the “computed_meas” method in each measurement model class.
- Parameters:
- targetSpacecraft
The target spacecraft for which the range measurement is to be computed.
- epoch_arrayEpochArray, optional
An array of epochs (times) at which the range measurements should be computed. If provided, overrides
epoch_start,epoch_end, andtstep.- epoch_startEpochArray, optional
The starting epoch for the range measurement computations. Required if
epoch_arrayis not provided.- epoch_endEpochArray, optional
The ending epoch for the range measurement computations. Required if
epoch_arrayis not provided.- tstepfloat, optional
The time step, in seconds, between consecutive range measurements. If epoch_array is not provided. Defaults to
1second.- frameFrame , optional
The reference frame in which the range computation is performed. Defaults to
None.- noisybool , optional
Whether to add noise to the computed range measurement. Defaults to
False.- file_namestr, optional
The filename of the JSON in which the measurement is saved, Defaults to
'ideal_measurement'.- check_visibilitybool, optional
When
True, epochs where the instrument cannot observe the target are removed before generating measurements. The specific check is instrument-dependent:GroundStationuses an elevation-angle test;Camerauses a FOV projection test. Defaults toFalse.- elevation_maskArrayWUnits or float, optional
Minimum elevation angle used by the
GroundStationvisibility check. AnArrayWUnitsis converted from its own units; a bare number is read as degrees (seeresolve_elevation_mask(), which refuses a bare one that could be radians). Ignored forCamerainstruments. Only relevant whencheck_visibility=True. Defaults to10.0degrees.- folder_path_overridestr, optional
If provided, the JSON file is saved directly to this path instead of the default
data/measurements/radiometricordata/measurements/opticalfolder. The directory is created automatically if it does not exist. Defaults toNone.- fmt{“json”, “pickle”}, optional
On-disk format; selects the
.jsonor.pklextension appended tofile_name. Read back transparently byobserved_measurements(). Defaults to"json".
- Returns:
- None
- AUX_KEYS = Measurement.TrackingAuxKeys(required=('RU', 'M', 'M2_num', 'M2_den', 'ul_freq', 'rcv_time_tag_delay', 'transmit_time_tag_delay', 'ul_zheight_corr', 'dl_zheight_corr', 'ul_stn_cal', 'dl_stn_cal'), optional=('array_delay', 'exc_scalar_num', 'exc_scalar_den', 'rng_type', 'version_num'), record_fields={'rng_modulo': 'M', 'scft_transpd_turn_num': 'M2_num', 'scft_transpd_turn_den': 'M2_den'}, outlier_flag='outlier_flag_sranging')#
Auxiliary-data layout of this model.
- DL_STATION_CAL = 850000.0#
Default downlink station calibration [RU] of simulated auxiliary data, the starting
dl_station_calof a model.Representative, not physical: real passes carry the station value.
- DSN_BANDS = {'S': Measurement.DSNBand(name='S', uplink_multiplier=221, downlink_multiplier=240, turnaround_num=240, turnaround_den=221, exciter_scalar_num=221.0, exciter_scalar_den=7072.0, uplink_frequency=2110362223.0 Hz, ru_reference_frequency=2303391185.181818 Hz), 'X': Measurement.DSNBand(name='X', uplink_multiplier=749, downlink_multiplier=880, turnaround_num=880, turnaround_den=749, exciter_scalar_num=221.0, exciter_scalar_den=23968.0, uplink_frequency=7152313596.9977 Hz, ru_reference_frequency=8445767679.0 Hz)}#
Default DSN frequency-band parameters, keyed by band letter, each a
DSNBand. A model starts with these asdsn_bands.Supported bands are
'X'and'S'.'X'holds the values the measurement models used as literals before they were collected here, so it is the default everywhere and reproduces the previous numbers exactly.[1]Moyer, T. D., Formulation for Observed and Computed Values of Deep Space Network Data Types for Navigation, JPL Publication 00-7, Monograph 2, Deep Space Communications and Navigation Series, Chapter 13.
[2]DSN Telecommunications Link Design Handbook, 810-005, Module 201, Frequency and Channel Assignments.
- LIGHT_TIME_FRAMES = ('barycentric', 'geocentric')#
- LIGHT_TIME_SETTINGS = {'et_tai_iterations': 2, 'max_iterations': 10, 'tolerance': 1e-12}#
Default settings of the round-trip light-time solution of the real measurement models, which take a dictionary with any of these keys as
light_time_settings. They apply to both solvers,_compute_precise_RTLT()and_compute_geocentric_RTLT()."tolerance"[s]: each leg (t3 to t2, then t2 to t1) is corrected with Moyer 2000 eq. 8-72 until the correction is no larger than this. 1e-12 s is 0.3 mm of one-way path. The correction cannot fall much below the float spacing of the one-way light time: 9.1e-13 s from 4096 s (8.2 AU), 1.8e-12 s from 8192 s (16 AU). A tolerance under that floor makes every leg run to"max_iterations", so raise it for distant spacecraft."max_iterations": iteration cap of each leg. A leg that reaches it keeps its last estimate and does not raise."et_tai_iterations": evaluations of the ET - TAI series (Moyer 2000 eq. 2-26) when the reception time is converted from TAI to ET. Each one is made at the ET the previous one gave. The first starts from the approximate series, eq. 2-27.
[1]Moyer, T.D. (2000). Formulation for Observed and Computed Values of Deep Space Network Data Types for Navigation. JPL Publication 00-7, Monograph 2, Deep Space Communications and Navigation Series, Sec. 8.3.6 and Eq. 2-26.
- PARTIALS_METHODS = ('fd', 'analytical')#
- RAMP_AUX_KEYS = ('ramp_sec', 'ramp_day', 'ramp_freq', 'ramp_rate', 'ramp_type')#
Auxiliary-data keys of the ramp table every real radiometric model carries: start second of day, day of year, frequency, rate and type of each ramp segment.
- RAMP_ENTRIES = 12#
Default number of entries of a simulated ramp table, the starting
ramp_entriesof a model.
- RAMP_MARGIN = 3600.0 sec#
Default span a simulated ramp table extends before the first and after the last observation, the starting
ramp_marginof a model.The uplink transmit time precedes the first tag by the round-trip light time, so a table that starts at the first tag raises
RampCoverageError. One hour clears a spacecraft out to the asteroid belt.
- RAMP_RATE = 0.2826 sec^-2#
Default uplink frequency ramp rate of a simulated ramp table, the starting
ramp_rateof a model.A representative DSN ramp slope, not a physical constant: real passes carry their measured rate in the ramp table.
- RAMP_TYPE = 1#
Default ramp type of a simulated ramp table, the SFDU 9
ramp_typecode of a ramped segment; the startingramp_typeof a model.
- RAMP_YEAR_KEY = 'ramp_year'#
Auxiliary-data key of the year of each ramp segment. Optional: a table read without it is assumed to lie in the year of the observations.
- RANGE_MODULO = 1073741824#
Default sequential-ranging code modulo, \(2^{30}\), the starting
range_moduloof a model.The observable wraps at this count, so a range change larger than the modulo is ambiguous. Carried per observation in the auxiliary data because a pass may use a shorter code.
- RANGING_TYPE = 0#
Default SFDU 7
rng_typecode of simulated sequential ranging, the startingranging_typeof a model.
- RANGING_VERSION = 2#
Default SFDU 7
version_numof simulated sequential ranging, the startingranging_versionof a model.
- RCV_TIME_TAG_DELAY = 0.0008 sec#
Default receive time-tag delay of simulated auxiliary data, the starting
rcv_time_tag_delayof a model.Representative, not physical: real passes carry the station value.
- TRANSPONDER_DELAY = 1e-05#
Default spacecraft transponder delay [RU] of simulated auxiliary data, the starting
transponder_delayof a model.Representative, not physical: real passes carry the calibrated delay.
- UL_STATION_CAL = 5000.0#
Default uplink station calibration [RU] of simulated auxiliary data, the starting
ul_station_calof a model.Representative, not physical: real passes carry the station value.
- property component_labels: tuple[str, str]#
Names of the two components of a vector observable.
A two-component measurement is split into one scalar dataset per component, and these are the suffixes those datasets carry — so they end up as the residual keys in
solution.json. Each model sets them in its__init__beside_measurement_type:AngularIdealmeasures("ra", "dec"),CentroidingIdeal("sample", "line").
- property computed_measurements_dict: dict#
Auxiliary TRK-2-34 tracking-data dictionary needed for the generation of the computed measurements of a real radiometric model. See the
computed_measurements_dictparameter ofDopplerRealandSequentialRangingRealfor the keys each requires.
- property default_dataset_name: str#
Dataset name used when the caller does not supply one.
"<instrument>_<measurement_type>", which is the convention the radiometric datasets already read as —DSS-14_RangeIdeal— and now the optical ones too. For a camera-based model the instrument is the camera, so a centroiding dataset comes out asNAC_CentroidingIdeal.Note that an
AngularIdealobserver is the spacecraft, not the camera (its name is resolved through SPICE), so a run that images with several cameras should passdataset_nameexplicitly to tell them apart.
- property dl_station_cal: float#
Downlink station calibration [RU] written into simulated auxiliary data. Starts as
DL_STATION_CAL.
- property dsn_bands: MappingProxyType#
DSN frequency-band parameters of this model, a read-only mapping from band letter to
DSNBand. Starts asDSN_BANDS.The
bandof a real model is looked up here, for the reference frequency that converts the transponder delay to seconds and the range unit of a tracking file without exciter scalars, and so is the band of thedefault_*_auxbuilders, which take its turnaround ratio, exciter scalars and uplink frequency.Set a whole new mapping to change it; its keys are upper-cased.
Examples
X = model.dsn_bands["X"] model.dsn_bands = { **model.dsn_bands, "X": dataclasses.replace(X, uplink_frequency=scb.ArrayWUnits(7.18e9, 1 / sec)), }
- property epoch_sec: EpochArray#
Observation epochs expressed as seconds of day.
- property instrument: Instrument#
The instrument.
- property media_corrections#
Tropospheric and ionospheric path-delay model, or
Noneif not set.
- property ramp_entries: int#
Number of entries of a simulated ramp table, at least 2. Starts as
RAMP_ENTRIES.
- property ramp_margin: ArrayWUnits#
Span [s] a simulated ramp table extends before the first and after the last observation. Starts as
RAMP_MARGIN; see_default_aux_grids()for why it is needed.Set an ArrayWUnits time, or a bare, non-negative number of seconds.
- property ramp_rate: ArrayWUnits#
Uplink frequency ramp rate [Hz/s] of the ramp table the
default_*_auxbuilders simulate. Starts asRAMP_RATE.Set an ArrayWUnits, converted to 1/s^2, or a bare number in Hz/s.
- property ramp_type: int#
SFDU 9
ramp_typecode of the segments of a simulated ramp table. Starts asRAMP_TYPE.
- property range_modulo: int#
Code modulo [RU] of the sequential ranging
default_seqranging_aux()simulates, a positive whole number. Starts asRANGE_MODULO.A real pass keeps the modulo of its tracking file.
- property ranging_type: int#
SFDU 7
rng_typecode of the simulated sequential ranging. Starts asRANGING_TYPE.
- property ranging_version: int#
SFDU 7
version_numof the simulated sequential ranging. Starts asRANGING_VERSION.
- property rcv_time_tag_delay: ArrayWUnits#
Receive time-tag delay [s] written into simulated auxiliary data. Starts as
RCV_TIME_TAG_DELAY.Set an ArrayWUnits time, or a bare number of seconds.
- property sigma: ArrayWUnits#
The standard deviation of the measurement model.
- property solar_corona_coefficient: float#
Coefficient of the solar-corona group delay [us GHz^2 m^2] of a real model built with
solar_corona=True. Starts asMediaCorrections.SOLAR_CORONA_DELAY_COEFF; seeMediaCorrections._compute_SC_lt.A fixed change of the delay model. To estimate a correction from the data, estimate
solar_corona_scaleinstead.
- station_eps_defaults = {'body_orientation_delta': 0.0001 rad, 'eop_delta_celestial_pole_x': 0.0001 rad, 'eop_delta_celestial_pole_y': 0.0001 rad, 'eop_delta_pole_x': 0.0001 rad, 'eop_delta_pole_y': 0.0001 rad, 'eop_delta_ut1': 1.0 sec, 'gs_delta_location_CYL': 1.0 km, 'gs_delta_location_ECEF': 1.0 km, 'iono_zenith_delay': 10.0 m, 'love_h2': 100.0, 'pole_dec': 0.0001 rad, 'pole_pm': 1e-06, 'pole_ra': 0.0001 rad, 'pole_w0': 0.0001 rad, 'shida_l2': 100.0, 'tropo_zenith_delay': 10.0 m}#
Finite-difference perturbations for station parameters, used only by
partials_method="fd"(_compute_partials_with_fd()); every analytical path differentiates the station in closed form. They live in the sameeps_dictas the spacecraftdx/dvxentries, keyed by StateDefinition parameter kind, so a model has one perturbation dictionary rather than two. The values are large because an RTLT solution and ramp integration lose significance in a small perturbation; they are numerical choices, not prior sigmas. The light time carries about 1e-13 s of noise per leg (SSB positions near 1.5e8 km), and a unit Love number moves a station by centimetres, so a Doppler fed by a step near one is mostly that noise. The tide and the zenith delays are exactly linear in their parameters, so their steps are as large as needed.
- property transponder_delay: float#
Spacecraft transponder delay [RU] written into simulated auxiliary data by the
default_*_auxbuilders. Starts asTRANSPONDER_DELAY.Only simulated data: a real pass takes the
sc_transponder_delay_RUgiven toobserved_measurements, or else the delay in its tracking file.
- property ul_station_cal: float#
Uplink station calibration [RU] written into simulated auxiliary data. Starts as
UL_STATION_CAL.